Adjust spacing between MHz and thermometer emoji for proper
column alignment in terminal.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Create rpi/banner.sh with print_banner, print_gradient_line,
print_logo, print_starfield, print_complete_banner functions
- Update setup.sh to source banner.sh (with inline fallback for curl)
- Update first-boot-wizard.sh to use banner functions
- Update sanitize-for-image.sh to use banner functions
- Fix MOTD thermometer spacing alignment
Single source of truth for ASCII banner styling.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- flash-stock-img.sh: Show stegasoo.local URL and SSH command
- setup.sh: Display both .local and IP URLs
- first-boot-wizard.sh: Prioritize .local URL, IP as fallback
- Clean up service file path display
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Read arm_freq from config.txt instead of vcgencmd live reading.
Previously showed 600 MHz at idle, now shows actual configured max.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Combined tarball includes pyenv Python 3.12 + venv with all deps
- Downloads from GitHub releases by default (~50MB)
- Reduces install time from 20+ min to ~2 min
- Add --no-prebuilt / --from-source flags to force compile
- Update BUILD_IMAGE.md with tarball creation instructions
- Rename tarball: stegasoo-pi-arm64.tar.zst (was venv-only)
Fresh Pi installs no longer need to compile Python or jpegio.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- USE_PREBUILT=true by default, downloads from GitHub releases
- Add --no-prebuilt / --from-source flags for manual builds
- Update estimated time: ~2 min vs 15-20 min from source
- Update help text with new options
Fresh Pi installs now download pre-built venv automatically,
cutting install time from 20+ minutes to ~2 minutes.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Move repo clone to step 4 (before pyenv) to check for tarball early
- Set USE_PREBUILT flag immediately after cloning
- Python compile only happens if not already installed (fallback)
- Better progress messages during install
This ensures pre-built venv detection happens before expensive
Python compile step, and skips compile entirely on repeat installs.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
QR Channel Key Sharing:
- Admin-only QR generator in about.html (was visible to all)
- QR button for saved keys on account page
- Fixed about() route missing channel status vars (bug)
Pi Build Optimization:
- Pre-built venv tarball support (39MB zstd, skips 20+ min compile)
- setup.sh auto-detects and extracts tarball if present
- Strip __pycache__/tests before tarball (295MB → 208MB)
Flash Script Improvements:
- flash-image.sh now uses config.json for headless WiFi setup
- Consistent wipe prompt on both flash scripts
- pull-image.sh re-enables auto-expand before shrinking
Build Docs:
- Added zstd and jq to pre-setup apt-get
- Documented fast build option with pre-built venv
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- wizard/setup now generate certs when HTTPS enabled
- app.py has proper error handling for cert failures
- Add custom SSL certificate documentation to INSTALL.md
- Include SANs for hostname, localhost, and local IP
Previously HTTPS could be enabled but certs weren't generated,
causing SSL_ERROR_RX_RECORD_TOO_LONG browser errors.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Horizontal borders: deep purple (93) → light blue (117) gradient
- STEGASOO ASCII logo: gold (220) to match web UI
- Applied to all RPi scripts: first-boot-wizard, setup, sanitize
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Progress bar support (v4.1.2):
- Web frontend: Real-time progress during encode with phase display
- CLI: --progress flag with rich library for encode command
- Backend: progress_file parameter for async progress reporting
DCT decode bug fix:
- Fixed InvalidMagicBytesError not being caught in early-exit check
- RS-protected format (v4.1.0+) has length prefix first, not magic bytes
- Exception handler now catches both ValueError and InvalidMagicBytesError
MOTD update:
- Added sparkly header to setup.sh MOTD (matches other rpi scripts)
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- System MOTD already shows banner, bashrc one was redundant
- Source bashrc immediately after copying for instant effect
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
iptables requires root to read NAT rules. Instead check if the
iptables-restore service is enabled, which indicates 443 redirect
was configured.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
On SSH login, shows ASCII logo and active URL if service is running,
or instructions to start if not.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Use `pyenv which python` instead of hardcoded path to handle
version mapping (3.12 -> 3.12.12).
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- setup.sh: Add btop to apt install for temp monitoring
- first-boot-wizard: Add Step 4 for overclock configuration
- Detects Pi 4/5 model
- Asks about active cooling
- Offers appropriate overclock settings (2.0GHz Pi4, 2.8GHz Pi5)
- Prompts for restart if enabled
- decode.html: Make message box click-to-copy, remove separate button
- Shows "(click to copy)" hint
- Visual feedback on hover and copy
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Clone stegasoo BEFORE building jpegio (need patch script)
- Create venv with explicit pyenv Python path
- Build jpegio INTO venv (not globally)
- Add python3-dev to apt dependencies
- Update step count from 9 to 11
This fixes the issue where jpegio was built globally, then pip
tried to reinstall unpatched jpegio from PyPI into the venv.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Branch 4.1 includes Reed-Solomon error correction for DCT
steganography which is required for reliable operation.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- 4 spaces before sparkle lines
- 3 spaces before logo top line
- 2 spaces before logo body
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Creates /etc/profile.d/stegasoo-path.sh to add:
- /opt/stegasoo/venv/bin (stegasoo CLI)
- /opt/stegasoo/rpi (setup.sh, sanitize-for-image.sh, etc)
Users can now run 'stegasoo' and the rpi scripts from anywhere.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Replace the complex dot pattern with cleaner sparkle-style banners
using . * . patterns above and below the STEGASOO logo. Also fixes
duplicate logo lines that were present in setup.sh and sanitize.sh.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add stegasoo.conf.example with all configurable options
- setup.sh: Add -h/--help, load config from /etc and ~/.config
- setup.sh: Support STEGASOO_BRANCH for non-main branches
- sanitize-for-image.sh: Add -h/--help with usage examples
Config files are loaded in order:
1. /etc/stegasoo.conf (system-wide)
2. ~/.config/stegasoo/stegasoo.conf (per-user)
3. Environment variables (highest priority)
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- setup.sh: Install to /opt/stegasoo with proper permissions
- first-boot-wizard.sh: Use /opt/stegasoo
- stegasoo-wizard.sh: Check /opt first, fallback to home dirs
- sanitize-for-image.sh: Handle both /opt and home locations
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Consistent branding across all RPi scripts with the stegosaurus
plate banner, gray dots, and cyan accents.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add stegosaurus-themed ASCII art with diamond plates and halftone dots
- Replace box-drawing characters with simple dashes for headers
- Consistent styling across first-boot-wizard.sh, setup.sh, sanitize-for-image.sh
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Create rpi/patches/ directory with multi-strategy patching
- Patch tries: patch file → sed → Python regex → already-patched detection
- Fix jpegio patch to handle multiple -m64 occurrences
- Update docs to use wget instead of curl|bash (stdin conflict with read)
- Update SSH examples to use admin@stegasoo.local🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Prompt for HTTPS enable/disable
- Prompt for port 443 with iptables redirect
- Prompt for channel key generation
- Offer to start service immediately
- Show summary with configured URL and channel key
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add STEGASOO_PORT environment variable support (default: 5000)
- Update .env.example with port and fix channel key format docs
- Move channel key generation to collapsible accordion in Generate page
- Improve RPi setup.sh output with HTTPS and channel key instructions
- Add rpi/BUILD_IMAGE.md workflow documentation
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
