- Simple single-line toasts in top-right corner
- Positioned below navbar (70px from top)
- Auto-dismiss after 4 seconds
- Color-coded: green success, yellow warning, red error
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Replace redirect flow with AJAX + modal popup
- Show credentials side-by-side (username | password)
- Compact warning message and right-aligned action buttons
- Add Another resets form, Done returns to user list
- Narrow flash messages to match card width
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Some RPi OS variants store WiFi credentials in /etc/netplan/*.yaml
files, particularly NetworkManager-generated configs (90-NM-*.yaml).
- Remove netplan WiFi configs during sanitization
- Update validation to check netplan location
- Covers wpa_supplicant, NetworkManager, and netplan now
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Modern Raspberry Pi OS uses NetworkManager instead of wpa_supplicant.
WiFi connections are stored in /etc/NetworkManager/system-connections/.
- Add removal of NetworkManager WiFi connections
- Update validation to check both locations
- Fixes WiFi credentials being baked into distributable images
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Rewrite auth.py for multi-user schema (users table with roles)
- Auto-migrate from single-user admin_user table to new schema
- Add @admin_required decorator for protected routes
- Admin routes: /admin/users, /admin/users/new, delete, reset-password
- New templates: admin/users.html, user_new.html, user_created.html, password_reset.html
- Update login.html for username field, base.html and account.html for admin nav
- Max 16 users + 1 admin, session invalidation on delete/password reset
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Skips all prompts when passed, auto-reboots (soft reset) or
auto-shutdowns (full sanitize) when complete.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add </dev/tty to read commands for reliable terminal input
- Use exec for reboot/shutdown to prevent returning to shell
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Consistent branding across all RPi scripts with the stegosaurus
plate banner, gray dots, and cyan accents.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Lines starting with · should end with · pattern,
lines starting with . should end with . pattern.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Double backslashes needed to prevent \033 from being escaped
by preceding backslash characters in echo -e output.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Each row of STEGASOO letters is now duplicated for a thicker,
CRT scanline-style effect.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Dots now gray with STEGASOO letters, plates, and labels in cyan
- Diamond plates simplified to 2 rows (/\ \/)
- Cleaner visual hierarchy
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Remove ExecStartPost that was calling systemctl restart ssh, which
caused a deadlock. The Before=ssh.service ordering ensures keys are
generated before ssh starts - no restart needed.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add stegosaurus-themed ASCII art with diamond plates and halftone dots
- Replace box-drawing characters with simple dashes for headers
- Consistent styling across first-boot-wizard.sh, setup.sh, sanitize-for-image.sh
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Creates a systemd service that regenerates SSH host keys on first boot,
fixing the issue where SSH would fail after sanitization.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Create rpi/patches/ directory with multi-strategy patching
- Patch tries: patch file → sed → Python regex → already-patched detection
- Fix jpegio patch to handle multiple -m64 occurrences
- Update docs to use wget instead of curl|bash (stdin conflict with read)
- Update SSH examples to use admin@stegasoo.local🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Delete debug/diagnostic scripts (minimal_flask_crash.py, check_scipy.py)
- Delete old version summary markdown files
- Update RPi docs with default creds (admin/stegasoo)
- Add --soft flag documentation for sanitize script
- Switch compression from xz to zstd
- Add RPi image artifacts to .gitignore
- Improve sanitize-for-image.sh with validation and soft reset mode
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- flash-image.sh: Add optional device argument to bypass auto-detection
- flash-image.sh/pull-image.sh: Remove bc dependency, use bash integer math
- sanitize-for-image.sh: Add better debugging and verification for wizard setup
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- pull-image.sh now uses zstd -19 instead of xz -9 (much faster, similar ratio)
- flash-image.sh supports .zst, .xz, and .gz formats
- Default output is now .img.zst
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Fix XSS in stegasoo.js: use textContent instead of innerHTML for filenames
- Fix operator precedence in channel key parsing (form data was ignored)
- Persist Flask secret key to instance/.secret_key so sessions survive restarts
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Create first-boot-wizard.sh with interactive step-by-step setup
- Step 1: HTTPS configuration
- Step 2: Port 443 configuration (if HTTPS enabled)
- Step 3: Channel key generation
- ASCII art banner and clear summaries
- Create stegasoo-wizard.sh profile.d hook to trigger wizard on SSH login
- Update sanitize-for-image.sh to:
- Install wizard hook in /etc/profile.d/
- Create first-boot flag file
- Reset service to defaults for fresh config
Users who flash a pre-built image will see the wizard on first SSH login.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Prompt for HTTPS enable/disable
- Prompt for port 443 with iptables redirect
- Prompt for channel key generation
- Offer to start service immediately
- Show summary with configured URL and channel key
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add STEGASOO_PORT environment variable support (default: 5000)
- Update .env.example with port and fix channel key format docs
- Move channel key generation to collapsible accordion in Generate page
- Improve RPi setup.sh output with HTTPS and channel key instructions
- Add rpi/BUILD_IMAGE.md workflow documentation
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- rpi/sanitize-for-image.sh: Removes personal data before imaging
- Clears WiFi credentials
- Removes SSH keys
- Clears Stegasoo auth database
- Removes logs, history, temp files
- Updated rpi/README.md with full image building workflow
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Use generate_channel_key() from channel module instead of hex
Format: XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- stegasoo generate --channel-key now outputs a 256-bit hex key
- Also added .env.example template for Web UI configuration
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Step-by-step guide for Pi 4/5 deployment
- pyenv setup for Python 3.12 (Pi OS ships with 3.13)
- jpegio ARM build patch (sed one-liner for -m64 flag)
- Full verification steps
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Consolidated all local dev scripts into scripts/ subdirectory.
Updated .gitignore to ignore entire scripts/ folder.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add single-admin login with SQLite3 user storage
- First-run setup wizard for admin account creation
- Account management page for password changes
- Optional HTTPS with auto-generated self-signed certificates
- Configurable via STEGASOO_AUTH_ENABLED, STEGASOO_HTTPS_ENABLED env vars
- UI improvements: larger QR previews, consistent panel styling
- Update docker-compose.yml with auth config and persistent volumes
- Update all documentation for v4.0.2
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Reduced from 433 to 123 lines by removing:
- Version history (now in CHANGELOG.md)
- Upgrade guides (now in CHANGELOG.md)
- Breaking changes sections
- Redundant examples
- Verbose project structure
README now focuses on: features, quick start, interfaces, security model.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
New files:
- LICENSE (MIT) - Required legal file
- CHANGELOG.md - Version history following Keep a Changelog
- CONTRIBUTING.md - Contributor guidelines
- CODE_OF_CONDUCT.md - Community standards
- .github/ISSUE_TEMPLATE/ - Bug report and feature request forms
- .github/PULL_REQUEST_TEMPLATE.md - PR checklist
- src/stegasoo/py.typed - PEP 561 type hint marker
- examples/ - Usage examples (basic, file embedding, channel keys)
Updated:
- README.md - Added CI status badges
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Deleted stale backup files:
- frontends/cli/main.py_old
- src/stegasoo/dct_steganography.py_old
Added gitignore patterns for common backup extensions.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
These are local dev convenience scripts that should not be tracked.
- quick_web.sh - Flask dev server launcher
- rbld_containers.sh - Docker rebuild helper
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
