Update WebUI screenshots for Encode/Decode pages

Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>

.github/workflows/release.yml

@@ -37,7 +37,8 @@ jobs:
   publish:
     needs: test  # Only run if tests pass
     runs-on: ubuntu-latest
-    
+    environment: pypi
+
     # Required for PyPI trusted publishing (recommended)
     permissions:
       id-token: write

INSTALL.md

@@ -20,22 +20,23 @@ Complete installation instructions for all platforms and deployment methods.
 
 ## Requirements
 
-### ⚠️ Python Version Requirements
+### Python Version Requirements
 
 | Python Version | Status | Notes |
 |----------------|--------|-------|
-| 3.10 | ✅ Supported | |
-| 3.11 | ✅ Supported | Recommended |
+| 3.10 | ❌ Not Supported | Dropped in v4.2.1 |
+| 3.11 | ✅ Supported | Minimum version |
 | 3.12 | ✅ Supported | Recommended |
-| 3.13 | ❌ **Not Supported** | jpegio C extension incompatible |
+| 3.13 | ✅ Supported | |
+| 3.14 | ✅ Supported | Tested on Arch |
 
-**Important:** Python 3.13 (released October 2024) is **not compatible** with jpegio due to C extension ABI changes. Use Python 3.12 or earlier.
+**Note:** v4.2.1 switched from `jpegio` to `jpeglib` for DCT steganography, enabling Python 3.11-3.14 support.
 
 ### Minimum Requirements
 
 | Requirement | Value |
 |-------------|-------|
-| Python | 3.10-3.12 |
+| Python | 3.11-3.14 |
 | RAM | 512 MB minimum (256MB for Argon2) |
 | Disk | ~100 MB |
 
@@ -423,16 +424,61 @@ pip install jpegio
 
 ### Windows
 
-1. Install Python 3.12 from [python.org](https://python.org) (NOT 3.13!)
-2. Install Visual Studio Build Tools
+Windows users have three options, listed from easiest to most complex:
+
+#### Option 1: Docker Desktop (Recommended)
+
+The easiest way to run Stegasoo on Windows. No Python installation needed.
+
+1. Install [Docker Desktop](https://www.docker.com/products/docker-desktop/)
+2. Enable WSL2 backend when prompted
+3. Clone and run:
+
+```powershell
+git clone https://github.com/adlee-was-taken/stegasoo.git
+cd stegasoo
+docker-compose -f docker/docker-compose.yml up -d web
+```
+
+Access at http://localhost:5000
+
+#### Option 2: WSL2 (Windows Subsystem for Linux)
+
+Run the Linux version natively on Windows.
+
+```powershell
+# Install WSL2 with Ubuntu
+wsl --install -d Ubuntu
+
+# Open Ubuntu terminal, then follow Linux instructions:
+sudo apt-get update
+sudo apt-get install -y python3.12 python3.12-venv libzbar0 libjpeg-dev
+git clone https://github.com/adlee-was-taken/stegasoo.git
+cd stegasoo
+python3.12 -m venv venv
+source venv/bin/activate
+pip install -e ".[all]"
+stegasoo --version
+```
+
+#### Option 3: Native Windows (Advanced)
+
+Native Windows installation requires Visual Studio Build Tools for compiling C extensions.
+
+1. Install Python 3.11 or 3.12 from [python.org](https://python.org)
+2. Install [Visual Studio Build Tools](https://visualstudio.microsoft.com/visual-cpp-build-tools/) with "Desktop development with C++"
 3. Install from pip:
 
 ```powershell
 python -m venv venv
 .\venv\Scripts\activate
-pip install stegasoo[all]
+pip install stegasoo[cli]  # CLI only (easiest)
+# or
+pip install stegasoo[all]  # Full install (may require additional setup)
 ```
 
+**Note:** Native Windows installation may have issues with `jpegio` (DCT mode). Docker or WSL2 is recommended for full functionality.
+
 ### Raspberry Pi
 
 Stegasoo works on Raspberry Pi 4/5 (4GB+ RAM recommended for Web UI).

README.md

@@ -4,7 +4,7 @@ A secure steganography system for hiding encrypted messages in images using hybr
 
 [![Tests](https://github.com/adlee-was-taken/stegasoo/actions/workflows/test.yml/badge.svg)](https://github.com/adlee-was-taken/stegasoo/actions/workflows/test.yml)
 [![Lint](https://github.com/adlee-was-taken/stegasoo/actions/workflows/lint.yml/badge.svg)](https://github.com/adlee-was-taken/stegasoo/actions/workflows/lint.yml)
-![Python](https://img.shields.io/badge/Python-3.10--3.12-blue)
+![Python](https://img.shields.io/badge/Python-3.11--3.14-blue)
 [![License: MIT](https://img.shields.io/badge/License-MIT-green.svg)](LICENSE)
 ![Security](https://img.shields.io/badge/Security-AES--256--GCM-red)
 

aur-api/README.md

@@ -0,0 +1,102 @@
+# Stegasoo API AUR Package
+
+REST API server package for programmatic steganography operations. Includes HTTPS support and API key authentication.
+
+## Installation
+
+### From AUR (once published)
+```bash
+yay -S stegasoo-api-git
+# or
+paru -S stegasoo-api-git
+```
+
+### Manual build
+```bash
+git clone https://aur.archlinux.org/stegasoo-api-git.git
+cd stegasoo-api-git
+makepkg -si
+```
+
+## What Gets Installed
+
+- `/opt/stegasoo-api/venv/` - Self-contained Python venv with API dependencies
+- `/opt/stegasoo-api/config/` - API key storage
+- `/opt/stegasoo-api/certs/` - TLS certificates
+- `/usr/bin/stegasoo` - CLI executable
+- `/usr/lib/systemd/system/stegasoo-api.service` - Systemd service
+
+## Quick Start
+
+```bash
+# 1. Create an API key
+sudo -u stegasoo stegasoo api keys create mykey
+
+# 2. Start the service
+sudo systemctl enable --now stegasoo-api
+
+# 3. Test the API
+curl -k -H "X-API-Key: YOUR_KEY" https://localhost:8000/
+```
+
+## Service Details
+
+| Setting | Value |
+|---------|-------|
+| Port | 8000 |
+| Protocol | HTTPS (self-signed cert auto-generated) |
+| API Docs | https://localhost:8000/docs |
+| OpenAPI | https://localhost:8000/openapi.json |
+
+## API Key Management
+
+```bash
+# List all keys
+stegasoo api keys list
+
+# Create a new key
+sudo -u stegasoo stegasoo api keys create <name>
+
+# Revoke a key
+sudo -u stegasoo stegasoo api keys revoke <name>
+```
+
+## TLS Configuration
+
+```bash
+# View current certificate info
+stegasoo api tls info
+
+# Generate new self-signed certificate
+sudo -u stegasoo stegasoo api tls generate
+
+# Use custom certificates (edit service)
+sudo systemctl edit stegasoo-api
+# Add:
+# [Service]
+# ExecStart=
+# ExecStart=/opt/stegasoo-api/venv/bin/stegasoo api serve \
+#     --host 0.0.0.0 --port 8000 \
+#     --cert /path/to/cert.pem --key /path/to/key.pem
+```
+
+## Manual Run (without systemd)
+
+```bash
+# Development mode (auto-reload)
+/opt/stegasoo-api/venv/bin/stegasoo api serve --reload
+
+# Production mode
+/opt/stegasoo-api/venv/bin/stegasoo api serve --host 0.0.0.0 --port 8000
+```
+
+## For Web UI
+
+Install the full package instead:
+```bash
+yay -S stegasoo-git
+```
+
+## Maintainer
+
+Aaron D. Lee

aur-api/stegasoo-api-git.install

@@ -10,25 +10,40 @@ post_install() {
     chown -R stegasoo:stegasoo /opt/stegasoo-api/certs 2>/dev/null || true
 
     echo ""
-    echo "Stegasoo API installed successfully!"
+    echo "==============================================="
+    echo "  Stegasoo API installed successfully!"
+    echo "==============================================="
     echo ""
-    echo "Quick Start:"
+    echo "-----------------------------------------------"
+    echo "  Quick Start"
+    echo "-----------------------------------------------"
     echo "  1. Create an API key:"
-    echo "     stegasoo api keys create mykey"
+    echo "     sudo -u stegasoo stegasoo api keys create mykey"
     echo ""
     echo "  2. Start the API server:"
     echo "     sudo systemctl start stegasoo-api"
+    echo "     sudo systemctl enable stegasoo-api  # auto-start"
     echo ""
     echo "  3. Access the API:"
     echo "     curl -k -H 'X-API-Key: YOUR_KEY' https://localhost:8000/"
     echo ""
-    echo "Management commands:"
+    echo "-----------------------------------------------"
+    echo "  Service Details"
+    echo "-----------------------------------------------"
+    echo "  Port: 8000 (HTTPS by default)"
+    echo "  Docs: https://localhost:8000/docs"
+    echo "  Status: sudo systemctl status stegasoo-api"
+    echo ""
+    echo "-----------------------------------------------"
+    echo "  Management Commands"
+    echo "-----------------------------------------------"
     echo "  stegasoo api keys list       # List API keys"
     echo "  stegasoo api keys create X   # Create new key"
+    echo "  stegasoo api tls generate    # Generate TLS certs"
     echo "  stegasoo api tls info        # Show certificate info"
     echo "  stegasoo api serve --help    # Server options"
     echo ""
-    echo "API docs available at: https://localhost:8000/docs"
+    echo "==============================================="
     echo ""
 }
 

aur-cli/README.md

@@ -0,0 +1,62 @@
+# Stegasoo CLI AUR Package
+
+Lightweight CLI-only package for steganography operations. No web UI or API server.
+
+## Installation
+
+### From AUR (once published)
+```bash
+yay -S stegasoo-cli-git
+# or
+paru -S stegasoo-cli-git
+```
+
+### Manual build
+```bash
+git clone https://aur.archlinux.org/stegasoo-cli-git.git
+cd stegasoo-cli-git
+makepkg -si
+```
+
+## What Gets Installed
+
+- `/opt/stegasoo-cli/venv/` - Self-contained Python venv with CLI dependencies only
+- `/usr/bin/stegasoo` - CLI executable
+
+## Usage
+
+```bash
+# Show all commands
+stegasoo --help
+
+# Generate credentials (passphrase + PIN)
+stegasoo generate
+stegasoo generate --words 5 --pin-length 8
+
+# Generate with RSA keys and QR codes
+stegasoo generate --rsa --qr-ascii
+
+# Encode a message
+stegasoo encode -i carrier.jpg -r reference.jpg -m "secret message" \
+    -P "word1 word2 word3 word4" -p 123456
+
+# Decode a message
+stegasoo decode -i encoded.png -r reference.jpg \
+    -P "word1 word2 word3 word4" -p 123456
+
+# Image tools
+stegasoo tools --help
+stegasoo tools compress image.png
+stegasoo tools rotate image.jpg 90
+```
+
+## For Web UI or REST API
+
+Install the full package instead:
+```bash
+yay -S stegasoo-git
+```
+
+## Maintainer
+
+Aaron D. Lee

aur-cli/stegasoo-cli-git.install

@@ -1,12 +1,15 @@
 post_install() {
     echo ""
-    echo "Stegasoo CLI installed successfully!"
+    echo "==============================================="
+    echo "  Stegasoo CLI installed successfully!"
+    echo "==============================================="
     echo ""
     echo "Usage:"
     echo "  stegasoo --help          # Show all commands"
+    echo "  stegasoo generate        # Generate passphrase + PIN"
     echo "  stegasoo encode ...      # Hide data in an image"
     echo "  stegasoo decode ...      # Extract hidden data"
-    echo "  stegasoo tools --help    # Image tools (compress, rotate, etc.)"
+    echo "  stegasoo tools --help    # Image tools (compress, etc.)"
     echo ""
     echo "For web UI or REST API, install stegasoo-git instead."
     echo ""

aur/README.md

@@ -1,6 +1,6 @@
 # Stegasoo AUR Package
 
-> **Note:** Uses Python 3.12 via `python312` AUR package (jpegio not yet compatible with 3.13)
+Full package with CLI, Web UI, and REST API. Supports Python 3.11-3.14.
 
 ## Installation
 
@@ -20,15 +20,15 @@ makepkg -si
 
 ## What Gets Installed
 
-- `/opt/stegasoo/venv/` - Self-contained Python 3.12 venv with all dependencies
+- `/opt/stegasoo/venv/` - Self-contained Python venv with all dependencies
 - `/usr/bin/stegasoo` - CLI symlink
-- `/usr/lib/systemd/system/stegasoo-web.service` - Web UI service
-- `/usr/lib/systemd/system/stegasoo-api.service` - REST API service
+- `/usr/lib/systemd/system/stegasoo-web.service` - Web UI service (port 5000)
+- `/usr/lib/systemd/system/stegasoo-api.service` - REST API service (port 8000, HTTPS)
 
 ## Optional Dependencies
 
 ```bash
-# QR code reading from webcam/images
+# QR code reading from webcam/images (recommended)
 sudo pacman -S zbar
 ```
 
@@ -39,41 +39,52 @@ All other dependencies are bundled in the venv.
 ### CLI
 ```bash
 stegasoo --help
-stegasoo generate --rsa --qr-ascii
-stegasoo encode -i carrier.jpg -r reference.jpg -m "secret" -P passphrase -p 123456
+stegasoo generate                    # Generate passphrase + PIN
+stegasoo generate --rsa --qr-ascii   # With RSA keys and QR codes
+stegasoo encode -i carrier.jpg -r reference.jpg -m "secret" -P "word1 word2 word3 word4" -p 123456
+stegasoo decode -i encoded.png -r reference.jpg -P "word1 word2 word3 word4" -p 123456
 ```
 
-### Web UI (systemd)
+### Web UI
 ```bash
-# Create service user (first time)
-sudo useradd -r -s /usr/bin/nologin stegasoo
-
-# Start service
+# Start service (user created automatically on install)
 sudo systemctl enable --now stegasoo-web
 
 # Access at http://localhost:5000
 ```
 
-### REST API (systemd)
+### REST API
 ```bash
-# Start service
+# Create an API key first
+sudo -u stegasoo stegasoo api keys create mykey
+
+# Start service (HTTPS with auto-generated self-signed cert)
 sudo systemctl enable --now stegasoo-api
 
-# Access at http://localhost:8000/docs
+# Access docs at https://localhost:8000/docs
+curl -k -H "X-API-Key: YOUR_KEY" https://localhost:8000/
 ```
 
-### Manual run (without systemd)
+### HTTPS Configuration
+
+The API uses HTTPS by default with auto-generated self-signed certificates.
+
 ```bash
-# Web UI
-/opt/stegasoo/venv/bin/python -m gunicorn -b 0.0.0.0:5000 \
-    --chdir /opt/stegasoo/venv/lib/python3.12/site-packages/frontends/web app:app
+# View certificate info
+stegasoo api tls info
 
-# REST API
-/opt/stegasoo/venv/bin/uvicorn \
-    --app-dir /opt/stegasoo/venv/lib/python3.12/site-packages/frontends/api \
-    main:app --host 0.0.0.0 --port 8000
+# Generate new self-signed cert
+sudo -u stegasoo stegasoo api tls generate
+
+# Use custom certs (edit service file)
+sudo systemctl edit stegasoo-api
 ```
 
+## Alternative Packages
+
+- `stegasoo-cli-git` - CLI only, minimal dependencies
+- `stegasoo-api-git` - CLI + REST API, no web UI
+
 ## Maintainer
 
 Aaron D. Lee

aur/stegasoo-git.install

@@ -9,16 +9,51 @@ post_install() {
     chown -R stegasoo:stegasoo /opt/stegasoo/venv/var/app-instance 2>/dev/null || true
 
     echo ""
-    echo "Stegasoo installed successfully!"
+    echo "==============================================="
+    echo "  Stegasoo installed successfully!"
+    echo "==============================================="
     echo ""
     echo "CLI usage:"
     echo "  stegasoo --help"
+    echo "  stegasoo generate        # Generate credentials"
+    echo "  stegasoo encode          # Encode a message"
+    echo "  stegasoo decode          # Decode a message"
     echo ""
-    echo "To start the web UI:"
-    echo "  sudo systemctl start stegasoo-web"
+    echo "-----------------------------------------------"
+    echo "  Web UI Service"
+    echo "-----------------------------------------------"
+    echo "  Port: 5000 (HTTP)"
+    echo "  Start:   sudo systemctl start stegasoo-web"
+    echo "  Enable:  sudo systemctl enable stegasoo-web"
+    echo "  Status:  sudo systemctl status stegasoo-web"
+    echo "  Access:  http://localhost:5000"
     echo ""
-    echo "To start the REST API:"
-    echo "  sudo systemctl start stegasoo-api"
+    echo "-----------------------------------------------"
+    echo "  REST API Service"
+    echo "-----------------------------------------------"
+    echo "  Port: 8000 (HTTPS by default)"
+    echo "  Start:   sudo systemctl start stegasoo-api"
+    echo "  Enable:  sudo systemctl enable stegasoo-api"
+    echo "  Status:  sudo systemctl status stegasoo-api"
+    echo "  Access:  https://localhost:8000"
+    echo ""
+    echo "-----------------------------------------------"
+    echo "  HTTPS Configuration"
+    echo "-----------------------------------------------"
+    echo "  The API generates self-signed certs on first run."
+    echo "  To pre-generate or use custom certificates:"
+    echo ""
+    echo "  # Generate self-signed certs"
+    echo "  sudo -u stegasoo stegasoo api tls generate"
+    echo ""
+    echo "  # Use custom certs (edit the service file)"
+    echo "  sudo systemctl edit stegasoo-api"
+    echo "  # Add: ExecStart= with --cert and --key flags"
+    echo ""
+    echo "  # Create API keys for authentication"
+    echo "  sudo -u stegasoo stegasoo api keys create <name>"
+    echo ""
+    echo "==============================================="
     echo ""
 }
 

frontends/web/templates/base.html

@@ -16,11 +16,11 @@
                 <img src="{{ url_for('static', filename='logo.svg') }}" alt="Stegasoo" height="28">
             </a>
             {% if channel_configured %}
-            <span class="badge bg-success bg-opacity-25 small" style="padding-left: 0.35rem;" title="Private Channel: {{ channel_fingerprint }}">
+            <span class="badge bg-success bg-opacity-25 small me-auto" style="padding-left: 0.35rem;" title="Private Channel: {{ channel_fingerprint }}">
                 <i class="bi bi-shield-lock me-2" style="color: #6ee7b7;"></i><code style="font-size: 0.7rem; font-weight: 300; color: #c9a860;">{{ channel_fingerprint[:4] }}-••••-{{ channel_fingerprint[-4:] }}</code>
             </span>
             {% else %}
-            <span class="badge bg-secondary bg-opacity-25 small text-muted" style="padding-left: 0.35rem;" title="Public Channel: No shared channel key configured. Messages use only passphrase and PIN for encryption.">
+            <span class="badge bg-secondary bg-opacity-25 small text-muted me-auto" style="padding-left: 0.35rem;" title="Public Channel: No shared channel key configured. Messages use only passphrase and PIN for encryption.">
                 <i class="bi bi-globe me-1"></i>Public Channel
             </span>
             {% endif %}

pyproject.toml

@@ -114,6 +114,13 @@ include = [
 [tool.hatch.build.targets.wheel]
 packages = ["src/stegasoo", "frontends"]
 
+[tool.hatch.build.targets.wheel.sources]
+"src" = ""
+
+# Include data files in the wheel
+[tool.hatch.build.targets.wheel.force-include]
+"src/stegasoo/data/bip39-words.txt" = "stegasoo/data/bip39-words.txt"
+
 [tool.pytest.ini_options]
 testpaths = ["tests"]
 python_files = ["test_*.py"]

src/stegasoo/constants.py

@@ -25,6 +25,7 @@ BREAKING CHANGES in v3.2.0:
 - Renamed day_phrase → passphrase throughout codebase
 """
 
+import importlib.resources
 from pathlib import Path
 
 # ============================================================================
@@ -177,15 +178,32 @@ BATCH_OUTPUT_SUFFIX = "_encoded"
 
 
 def get_data_dir() -> Path:
-    """Get the data directory path."""
-    # Check multiple locations
+    """Get the data directory path.
+
+    Checks locations in order:
+    1. Package data (installed via pip/wheel) using importlib.resources
+    2. Development layout (src/stegasoo -> project root/data)
+    3. Docker container (/app/data)
+    4. Current working directory fallbacks
+    """
+    # Try package data first (works when installed via pip)
+    try:
+        pkg_data = importlib.resources.files("stegasoo.data")
+        # Check if the package data directory exists and has our files
+        if (pkg_data / "bip39-words.txt").is_file():
+            # Return as Path - importlib.resources.files returns a Traversable
+            return Path(str(pkg_data))
+    except (ModuleNotFoundError, TypeError):
+        pass
+
+    # Fallback to file-based locations
     # From src/stegasoo/constants.py:
     #   .parent = src/stegasoo/
     #   .parent.parent = src/
     #   .parent.parent.parent = project root (where data/ lives)
     candidates = [
+        Path(__file__).parent / "data",  # Installed package (stegasoo/data/)
         Path(__file__).parent.parent.parent / "data",  # Development: src/stegasoo -> project root
-        Path(__file__).parent / "data",  # Installed package
         Path("/app/data"),  # Docker
         Path.cwd() / "data",  # Current directory
         Path.cwd().parent / "data",  # One level up from cwd
@@ -196,8 +214,8 @@ def get_data_dir() -> Path:
         if path.exists():
             return path
 
-    # Default to first candidate
-    return candidates[0]
+    # Default to package data path for clearer error messages
+    return Path(__file__).parent / "data"
 
 
 def get_bip39_words() -> list[str]:

src/stegasoo/data/__init__.py

@@ -0,0 +1 @@
+# Package data directory for stegasoo