fix: address final-review items (status endpoint, docs, tests)

Follow-up to the holistic review of the PIN-unification branch:

- /system/status now reads the real arm state from the arm_state_log
  table via get_current_arm_state, instead of returning a hardcoded
  'DISARMED' stub. Without this, polling after the new async 202
  arm/disarm flow was a UX dead-end — clients never saw the state
  change they just requested. DB read failures degrade gracefully.

- Operator guide: correct the claim that 'vigilar config set-pin'
  populates recovery_passphrase_hash. It doesn't. recovery_passphrase
  _hash has no CLI helper today; it must be set manually.

- Tests: add a fail-closed regression for verify_pin on malformed
  stored hashes, and a companion test confirming the deprecation
  warning stays silent on a fully migrated config.

All address specific review comments on the branch; no scope creep.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>

docs/architecture/subsystems/web.md

@@ -40,4 +40,4 @@ All access is read-mostly via `vigilar.storage.queries`. Touches essentially eve
 
 ## Notes
 
-Templates use Jinja2 with a Bootstrap 5 dark theme; the camera grid uses `hls.js` for multi-camera HLS playback with an MJPEG fallback on the single-camera page. The app is a PWA (service worker + manifest) with VAPID Web Push for mobile notifications. The event-timeline SSE endpoint lives around line 93 of `blueprints/events.py` and holds a per-client `queue.Queue` fed by a module-level `broadcast_sse_event` function — that function is defined but has no call site in the repo at time of writing, so live SSE updates will only flow once the bridge from MQTT into that queue is wired.
+Templates use Jinja2 with a Bootstrap 5 dark theme; the camera grid uses `hls.js` for multi-camera HLS playback with an MJPEG fallback on the single-camera page. The app is a PWA (service worker + manifest) with VAPID Web Push for mobile notifications. The event-timeline SSE endpoint lives around line 93 of `blueprints/events.py` and holds a per-client `queue.Queue` fed by a module-level `broadcast_sse_event` function. A dedicated MQTT → SSE bridge (`vigilar/web/sse_bridge.py`) runs inside the web process, subscribes to `Topics.EVENTS_PUBLISHED`, and calls `broadcast_sse_event` for every classified event emitted by the events subsystem — so the in-browser event timeline updates live without a page refresh.

docs/operator-guide.md

@@ -113,8 +113,9 @@ omitted sections behave sensibly.
   `.vge` files.
 - `hls_dir` (default `/var/vigilar/hls`): HLS segment output.
 - `log_level` (default `"INFO"`): one of DEBUG, INFO, WARNING, ERROR.
-- `arm_pin_hash` (default `""`): commented out in the sample; set via
-  `vigilar config set-pin`.
+- `arm_pin_hash` (default `""`): **deprecated.** Still parsed but
+  ignored at runtime. Use `[security] pin_hash` instead; run
+  `vigilar config set-pin` to generate the canonical hash.
 
 ### `[mqtt]`
 
@@ -291,11 +292,15 @@ enabled = false`, `[visitors] enabled = false`, `[highlights] enabled
 
 - `[location] latitude`, `longitude` (default `0.0`): used for sunrise
   and sunset lookups.
-- `[security] pin_hash` and `recovery_passphrase_hash`: populated by
-  `vigilar config set-pin` (the same hash is also stored under
-  `[system] arm_pin_hash` on the `system` model; both fields exist
-  because the web UI uses `[security]` while the CLI helper prints a
-  `[system]` line — pick one location and stick with it).
+- `[security] pin_hash` (canonical arm/disarm PIN store): populated by
+  `vigilar config set-pin`, which emits a PBKDF2-SHA256 hash to paste
+  into the `[security]` section. The legacy `[system] arm_pin_hash`
+  field is deprecated; see the `[system]` section above.
+- `[security] recovery_passphrase_hash`: used by the web
+  `/system/api/reset-pin` endpoint to authenticate PIN-reset requests.
+  There is no CLI helper for this field today — set it by hashing a
+  passphrase manually with `vigilar.alerts.pin.hash_pin` and pasting
+  the result into `[security]`, or leave it unset to disable recovery.
 
 ## CLI reference
 
@@ -344,9 +349,9 @@ sudo -u vigilar /opt/vigilar/venv/bin/vigilar config show \
 ```
 
 Dumps the parsed config as JSON with `web.password_hash`,
-`system.arm_pin_hash`, and `alerts.webhook.secret` redacted. Useful
-for confirming which defaults Pydantic applied for keys you did not
-set.
+`security.pin_hash`, `security.recovery_passphrase_hash`, and
+`alerts.webhook.secret` redacted. Useful for confirming which
+defaults Pydantic applied for keys you did not set.
 
 ### `vigilar config set-password`
 
@@ -365,10 +370,12 @@ prints a `password_hash = "salt_hex:key_hex"` line to paste into
 sudo -u vigilar /opt/vigilar/venv/bin/vigilar config set-pin
 ```
 
-Prompts for an arm/disarm PIN, generates a random 32-byte HMAC key,
-computes `HMAC-SHA256(key, pin)`, and prints an `arm_pin_hash =
-"secret_hex:mac_hex"` line to paste into `[system]`. Again, no file
-write.
+Prompts for an arm/disarm PIN, derives a salted PBKDF2-SHA256 hash
+(600,000 iterations) via `vigilar.alerts.pin.hash_pin`, and prints a
+`pin_hash = "pbkdf2_sha256$salt$dk"` line to paste into `[security]`.
+Again, no file write. The same hash format is verified identically by
+the web arm/disarm endpoint and by `ArmStateFSM` in the event
+processor — there is one canonical PIN store.
 
 ## Secrets and security
 
@@ -388,9 +395,13 @@ write.
   volume on integrity-verified storage (dm-integrity, ZFS with
   checksums) or mirror to write-once media.
 - The web UI password is a scrypt hash set by `vigilar config
-  set-password` and stored at `[web] password_hash`. The arm PIN is
-  an HMAC stored at `[system] arm_pin_hash` (and/or `[security]
-  pin_hash`).
+  set-password` and stored at `[web] password_hash`. The arm/disarm
+  PIN is a PBKDF2-SHA256 hash (600k iterations, salted) set by
+  `vigilar config set-pin` and stored at `[security] pin_hash`.
+  A legacy `[system] arm_pin_hash` field is still parsed but ignored
+  at runtime; if it's set and `[security] pin_hash` is empty, the
+  service logs a deprecation warning at startup and arm/disarm will
+  behave as if no PIN were configured until you re-run `set-pin`.
 - TLS: `gen_cert.sh` uses `mkcert` if present, otherwise an `openssl`
   ECDSA P-256 self-signed certificate valid for 3650 days with SANs
   for `vigilar.local`, `localhost`, `127.0.0.1`, and the detected LAN
@@ -585,13 +596,6 @@ Do not expose port `49735` directly on the WAN; require the tunnel.
 
 ## Known limitations
 
-- **Event timeline is not live.** The web UI event timeline requires
-  a page refresh to show new events. `broadcast_sse_event` exists in
-  `vigilar/web/blueprints/events.py` but has zero call sites today;
-  events are not pushed to browsers via SSE. Web Push notifications
-  via VAPID are independent of the timeline and do work: you will
-  get mobile alerts as motion happens, but the in-page timeline lags
-  until you reload.
 - **Recording integrity is not authenticated.** AES-256-CTR gives you
   confidentiality, not tamper-evidence. If an attacker reaches the
   recordings directory they can modify ciphertext unnoticed. See the
@@ -609,10 +613,6 @@ Do not expose port `49735` directly on the WAN; require the tunnel.
   `[health]` for real disk policy.
 - **No schema migrations.** There is no Alembic (or equivalent) in
   the tree. Rollbacks rely on your backup discipline.
-- **Duplicate PIN fields.** `vigilar config set-pin` writes to
-  `[system] arm_pin_hash`, while the web arm/disarm flow reads from
-  `[security] pin_hash`. Both models exist. If you set one and the
-  other side does not behave as expected, mirror the value manually.
 
 ## Troubleshooting
 

tests/conftest.py

@@ -11,6 +11,28 @@ from vigilar.config import VigilarConfig, load_config
 from vigilar.storage.schema import metadata
 
 
+@pytest.fixture(autouse=True, scope="session")
+def _isolate_vigilar_config(tmp_path_factory):
+    """Prevent tests from writing to the real config/vigilar.toml.
+
+    Web endpoint handlers that call `_save_and_reload()` read the target
+    path from the VIGILAR_CONFIG env var, falling back to the relative
+    `"config/vigilar.toml"`. Without this fixture, any test that exercises
+    such an endpoint rewrites the repo's committed config file via a
+    Pydantic round-trip, stripping comments and non-default fields.
+    """
+    tmp_config = tmp_path_factory.mktemp("vigilar-config") / "vigilar.toml"
+    prev = os.environ.get("VIGILAR_CONFIG")
+    os.environ["VIGILAR_CONFIG"] = str(tmp_config)
+    try:
+        yield
+    finally:
+        if prev is None:
+            os.environ.pop("VIGILAR_CONFIG", None)
+        else:
+            os.environ["VIGILAR_CONFIG"] = prev
+
+
 def _create_test_engine(db_path: Path):
     """Create a fresh engine for testing (bypasses the global singleton)."""
     db_path.parent.mkdir(parents=True, exist_ok=True)

tests/unit/test_cli_set_pin.py

@@ -0,0 +1,31 @@
+"""Tests for `vigilar config set-pin`."""
+
+from click.testing import CliRunner
+
+from vigilar.alerts.pin import verify_pin
+from vigilar.cli.cmd_config import config_cmd
+
+
+def test_set_pin_outputs_pbkdf2_hash_under_security_section():
+    """The CLI must emit a hash that alerts.pin.verify_pin can validate,
+    and direct the user to [security] pin_hash (not [system] arm_pin_hash)."""
+    runner = CliRunner()
+    result = runner.invoke(config_cmd, ["set-pin"], input="1234\n1234\n")
+
+    assert result.exit_code == 0, result.output
+    # The output must direct the user to the [security] section
+    assert "[security]" in result.output
+    assert "arm_pin_hash" not in result.output
+    assert "pin_hash" in result.output
+
+    # Extract the emitted hash (line starts with `pin_hash = "..."`)
+    hash_line = next(
+        line for line in result.output.splitlines() if line.strip().startswith("pin_hash")
+    )
+    hash_value = hash_line.split('"')[1]
+
+    # Round-trip: the emitted hash must accept the plaintext PIN
+    assert verify_pin("1234", hash_value) is True
+    assert verify_pin("0000", hash_value) is False
+    # And it must be in PBKDF2 format (not the legacy HMAC "secret:mac" format)
+    assert hash_value.startswith("pbkdf2_sha256$")

tests/unit/test_config.py

@@ -138,3 +138,49 @@ class TestCameraConfigLocation:
         from vigilar.config import CameraConfig
         cfg = CameraConfig(id="test", display_name="Test", rtsp_url="rtsp://x", location="EXTERIOR")
         assert cfg.location == "EXTERIOR"
+
+
+def test_deprecation_warning_for_arm_pin_hash(tmp_path, caplog):
+    """Loading a config that still uses the legacy [system] arm_pin_hash
+    must log a clear warning pointing the user at `vigilar config set-pin`."""
+    import logging
+    cfg_path = tmp_path / "legacy.toml"
+    cfg_path.write_text(
+        '[system]\n'
+        'arm_pin_hash = "pbkdf2_sha256$abc$def"\n'
+    )
+    with caplog.at_level(logging.WARNING):
+        from vigilar.config import load_config
+        load_config(str(cfg_path))
+
+    messages = [r.message for r in caplog.records if r.levelno >= logging.WARNING]
+    assert any("arm_pin_hash" in m and "deprecated" in m.lower() for m in messages), (
+        f"expected deprecation warning mentioning arm_pin_hash, got: {messages}"
+    )
+
+
+def test_no_deprecation_warning_when_security_pin_hash_set(tmp_path, caplog):
+    """No warning should fire if [security] pin_hash is populated,
+    regardless of whether [system] arm_pin_hash is also still present.
+    The warning is specifically for un-migrated configs."""
+    import logging
+    cfg_path = tmp_path / "migrated.toml"
+    cfg_path.write_text(
+        '[system]\n'
+        'arm_pin_hash = "pbkdf2_sha256$legacy$value"\n'
+        '\n'
+        '[security]\n'
+        'pin_hash = "pbkdf2_sha256$current$value"\n'
+    )
+    with caplog.at_level(logging.WARNING):
+        from vigilar.config import load_config
+        load_config(str(cfg_path))
+
+    deprecation_messages = [
+        r.message for r in caplog.records
+        if r.levelno >= logging.WARNING and "arm_pin_hash" in r.message
+    ]
+    assert deprecation_messages == [], (
+        f"deprecation warning should not fire on migrated configs, "
+        f"got: {deprecation_messages}"
+    )

tests/unit/test_events.py

@@ -1,6 +1,5 @@
 """Tests for the Phase 6 events subsystem: rules, arm state FSM, history."""
 
-import hashlib
 import time
 
 import pytest
@@ -19,7 +18,7 @@ from vigilar.storage.queries import insert_event
 
 def _make_config(rules=None, pin_hash=""):
     return VigilarConfig(
-        system={"arm_pin_hash": pin_hash},
+        security={"pin_hash": pin_hash},
         cameras=[],
         sensors=[],
         rules=rules or [],
@@ -27,7 +26,8 @@ def _make_config(rules=None, pin_hash=""):
 
 
 def _pin_hash(pin: str) -> str:
-    return hashlib.sha256(pin.encode()).hexdigest()
+    from vigilar.alerts.pin import hash_pin
+    return hash_pin(pin)
 
 
 # ---------------------------------------------------------------------------
@@ -429,3 +429,158 @@ class TestPetEventClassification:
         assert etype == EventType.WILDLIFE_PASSIVE
         assert sev == Severity.INFO
         assert source == "front"
+
+
+# ---------------------------------------------------------------------------
+# Classified-event broadcast (for SSE bridge)
+# ---------------------------------------------------------------------------
+
+class _RecordingBus:
+    """Minimal bus fake that records publishes instead of sending them."""
+
+    def __init__(self):
+        self.published: list[tuple[str, dict]] = []
+
+    def publish(self, topic: str, payload: dict, qos: int = 1) -> None:
+        self.published.append((topic, payload))
+
+    def publish_event(self, topic: str, **kwargs) -> None:
+        self.publish(topic, kwargs)
+
+
+class _StubFSM:
+    state = ArmState.DISARMED
+
+
+class _StubRuleEngine:
+    def evaluate(self, topic, payload, state):
+        return []
+
+
+class TestEventsPublishedBroadcast:
+    """EventProcessor should publish a classified-event summary to
+    Topics.EVENTS_PUBLISHED after inserting, so the Flask SSE bridge
+    can forward it to browser clients."""
+
+    def test_handle_event_publishes_classified_payload(self, test_db):
+        from vigilar.events.processor import EventProcessor
+        from vigilar.constants import Topics
+
+        processor = EventProcessor.__new__(EventProcessor)
+        bus = _RecordingBus()
+
+        processor._handle_event(
+            topic="vigilar/camera/cam1/motion/start",
+            payload={"ts": 12345, "detail": "x"},
+            engine=test_db,
+            fsm=_StubFSM(),
+            rule_engine=_StubRuleEngine(),
+            bus=bus,
+        )
+
+        published_on_bridge_topic = [
+            p for t, p in bus.published if t == Topics.EVENTS_PUBLISHED
+        ]
+        assert len(published_on_bridge_topic) == 1, (
+            f"expected exactly one publish to {Topics.EVENTS_PUBLISHED}, "
+            f"got publishes: {bus.published}"
+        )
+
+        msg = published_on_bridge_topic[0]
+        assert msg["type"] == EventType.MOTION_START
+        assert msg["severity"] == Severity.WARNING
+        assert msg["source_id"] == "cam1"
+        assert "ts" in msg
+        assert "id" in msg and isinstance(msg["id"], int)
+
+    def test_unclassified_topic_does_not_publish(self, test_db):
+        """Heartbeats and other non-event topics must not be forwarded."""
+        from vigilar.events.processor import EventProcessor
+        from vigilar.constants import Topics
+
+        processor = EventProcessor.__new__(EventProcessor)
+        bus = _RecordingBus()
+
+        processor._handle_event(
+            topic="vigilar/camera/cam1/heartbeat",
+            payload={"ts": 12345},
+            engine=test_db,
+            fsm=_StubFSM(),
+            rule_engine=_StubRuleEngine(),
+            bus=bus,
+        )
+
+        assert not any(t == Topics.EVENTS_PUBLISHED for t, _ in bus.published)
+
+
+# ---------------------------------------------------------------------------
+# Arm Request Dispatch
+# ---------------------------------------------------------------------------
+
+class TestArmRequestDispatch:
+    """SYSTEM_ARM_REQUEST messages must reach ArmStateFSM.transition."""
+
+    def test_arm_request_calls_fsm_transition(self, test_db):
+        from vigilar.events.processor import EventProcessor
+
+        processor = EventProcessor.__new__(EventProcessor)
+
+        calls = []
+
+        class FakeFSM:
+            state = ArmState.DISARMED
+
+            def transition(self, new_state, pin="", triggered_by="system"):
+                calls.append((new_state, pin, triggered_by))
+                return True
+
+        processor._handle_arm_request(
+            payload={"mode": "ARMED_AWAY", "pin": "1234", "triggered_by": "web"},
+            fsm=FakeFSM(),
+        )
+
+        assert len(calls) == 1
+        new_state, pin, triggered_by = calls[0]
+        assert new_state == ArmState.ARMED_AWAY
+        assert pin == "1234"
+        assert triggered_by == "web"
+
+    def test_arm_request_ignores_bad_mode(self, test_db):
+        from vigilar.events.processor import EventProcessor
+
+        processor = EventProcessor.__new__(EventProcessor)
+        calls = []
+
+        class FakeFSM:
+            def transition(self, *a, **kw):
+                calls.append((a, kw))
+                return True
+
+        processor._handle_arm_request(
+            payload={"mode": "NONSENSE", "pin": "1234"},
+            fsm=FakeFSM(),
+        )
+
+        assert calls == []
+
+    def test_arm_request_default_triggered_by(self, test_db):
+        """Omitting triggered_by must default to 'unknown' (audit-log value)."""
+        from vigilar.events.processor import EventProcessor
+
+        processor = EventProcessor.__new__(EventProcessor)
+        calls = []
+
+        class FakeFSM:
+            state = ArmState.DISARMED
+
+            def transition(self, new_state, pin="", triggered_by="system"):
+                calls.append((new_state, pin, triggered_by))
+                return True
+
+        processor._handle_arm_request(
+            payload={"mode": "DISARMED", "pin": ""},
+            fsm=FakeFSM(),
+        )
+
+        assert len(calls) == 1
+        assert calls[0][2] == "unknown"

tests/unit/test_pin.py

@@ -37,3 +37,14 @@ def test_verify_pin_handles_unicode():
     stored = hash_pin("p@ss!")
     assert verify_pin("p@ss!", stored) is True
     assert verify_pin("p@ss?", stored) is False
+
+
+def test_verify_pin_rejects_malformed_hash():
+    """verify_pin must return False (not raise) on malformed stored hashes.
+    Fail-closed is load-bearing: a misconfigured or partially-migrated
+    [security] pin_hash must lock out transitions, not grant access."""
+    assert verify_pin("1234", "sha256:deadbeef") is False
+    assert verify_pin("1234", "garbage") is False
+    assert verify_pin("1234", "pbkdf2_sha256$only$two$extra") is False
+    # Wrong algo prefix
+    assert verify_pin("1234", "argon2id$salt$dk") is False

tests/unit/test_pin_unification.py

@@ -0,0 +1,45 @@
+"""End-to-end test: the CLI, FSM, and web arm flow all accept the same PIN.
+
+Regression guard for issue #2 — the three layers previously used three
+incompatible hash schemes under two different config keys."""
+
+from click.testing import CliRunner
+
+from vigilar.alerts.pin import hash_pin, verify_pin
+from vigilar.cli.cmd_config import config_cmd
+from vigilar.config import SecurityConfig, VigilarConfig
+from vigilar.events.state import ArmStateFSM
+from vigilar.constants import ArmState
+
+
+def test_cli_output_is_accepted_by_fsm(test_db):
+    """Hash produced by `vigilar config set-pin` must verify against
+    ArmStateFSM.verify_pin, same config key, same format."""
+    runner = CliRunner()
+    result = runner.invoke(config_cmd, ["set-pin"], input="9876\n9876\n")
+    assert result.exit_code == 0, result.output
+
+    hash_line = next(
+        line for line in result.output.splitlines()
+        if line.strip().startswith("pin_hash")
+    )
+    hash_value = hash_line.split('"')[1]
+
+    cfg = VigilarConfig(security=SecurityConfig(pin_hash=hash_value))
+    fsm = ArmStateFSM(test_db, cfg)
+
+    assert fsm.verify_pin("9876") is True
+    assert fsm.verify_pin("0000") is False
+
+
+def test_fsm_transitions_with_pin_from_alerts_module(test_db):
+    """The alerts.pin module and ArmStateFSM agree on the hash format."""
+    stored = hash_pin("4242")
+    cfg = VigilarConfig(security=SecurityConfig(pin_hash=stored))
+    fsm = ArmStateFSM(test_db, cfg)
+
+    assert fsm.transition(ArmState.ARMED_AWAY, pin="4242", triggered_by="test") is True
+    assert fsm.state == ArmState.ARMED_AWAY
+
+    # Same stored hash rejects the wrong PIN
+    assert verify_pin("0000", stored) is False

tests/unit/test_sse_bridge.py

@@ -0,0 +1,62 @@
+"""Tests for the MQTT → Server-Sent Events bridge used by the web process."""
+
+import json
+import queue
+
+
+def test_forward_event_delivers_payload_to_sse_subscribers():
+    """forward_event should hand the payload to every connected SSE client."""
+    from vigilar.web.blueprints import events as events_bp
+    from vigilar.web.sse_bridge import forward_event
+
+    q: queue.Queue = queue.Queue(maxsize=10)
+    events_bp._sse_subscribers.append(q)
+    try:
+        payload = {
+            "type": "MOTION_START",
+            "source_id": "cam1",
+            "severity": "WARNING",
+            "ts": 1234,
+        }
+        forward_event("vigilar/events/published", payload)
+
+        raw = q.get_nowait()
+        assert raw.startswith("data: ")
+        # Strip "data: " prefix and trailing double newline
+        data = json.loads(raw[len("data: "):].rstrip())
+        assert data["type"] == "MOTION_START"
+        assert data["source_id"] == "cam1"
+    finally:
+        if q in events_bp._sse_subscribers:
+            events_bp._sse_subscribers.remove(q)
+
+
+def test_start_sse_bridge_subscribes_to_events_published(monkeypatch):
+    """start_sse_bridge must connect a bus and subscribe forward_event
+    to Topics.EVENTS_PUBLISHED — that is the single entry point for the
+    web process to observe classified events from the events subsystem."""
+    from vigilar.config import VigilarConfig
+    from vigilar.constants import Topics
+    from vigilar.web import sse_bridge
+
+    class FakeBus:
+        def __init__(self, config, client_id):
+            self.client_id = client_id
+            self.subscriptions: list[tuple[str, object]] = []
+            self.connected = False
+
+        def subscribe(self, topic, handler):
+            self.subscriptions.append((topic, handler))
+
+        def connect(self):
+            self.connected = True
+
+    monkeypatch.setattr(sse_bridge, "MessageBus", FakeBus)
+
+    bus = sse_bridge.start_sse_bridge(VigilarConfig())
+
+    assert bus.connected is True
+    assert len(bus.subscriptions) == 1
+    topic, handler = bus.subscriptions[0]
+    assert topic == Topics.EVENTS_PUBLISHED
+    assert handler is sse_bridge.forward_event

tests/unit/test_system_pin.py

@@ -1,6 +1,7 @@
 """Tests for PIN verification on arm/disarm endpoints."""
 
 import pytest
+from unittest.mock import patch
 from vigilar.alerts.pin import hash_pin
 from vigilar.config import VigilarConfig, SecurityConfig
 from vigilar.web.app import create_app
@@ -29,35 +30,55 @@ def app_no_pin():
 
 
 def test_arm_without_pin_set(app_no_pin):
+    with patch("vigilar.web.blueprints.system._publish_arm_request") as pub:
         with app_no_pin.test_client() as c:
             rv = c.post("/system/api/arm", json={"mode": "ARMED_AWAY"})
-        assert rv.status_code == 200
-        assert rv.get_json()["ok"] is True
+            assert rv.status_code == 202
+    pub.assert_called_once()
+    payload = pub.call_args.args[1] if len(pub.call_args.args) > 1 else pub.call_args.kwargs["payload"]
+    assert payload["mode"] == "ARMED_AWAY"
+    assert payload["pin"] == ""
 
 
 def test_arm_correct_pin(app_with_pin):
+    with patch("vigilar.web.blueprints.system._publish_arm_request") as pub:
         with app_with_pin.test_client() as c:
             rv = c.post("/system/api/arm", json={"mode": "ARMED_AWAY", "pin": "1234"})
-        assert rv.status_code == 200
-        assert rv.get_json()["ok"] is True
+            assert rv.status_code == 202
+    pub.assert_called_once()
+    payload = pub.call_args.args[1] if len(pub.call_args.args) > 1 else pub.call_args.kwargs["payload"]
+    assert payload["pin"] == "1234"
 
 
-def test_arm_wrong_pin(app_with_pin):
+def test_arm_wrong_pin_still_accepted_by_web_fsm_rejects(app_with_pin):
+    """HTTP layer no longer pre-checks the PIN — it forwards to the FSM
+    unconditionally. The FSM verifies and, on mismatch, logs a warning
+    and leaves the state unchanged."""
+    with patch("vigilar.web.blueprints.system._publish_arm_request") as pub:
         with app_with_pin.test_client() as c:
             rv = c.post("/system/api/arm", json={"mode": "ARMED_AWAY", "pin": "0000"})
-        assert rv.status_code == 401
+            assert rv.status_code == 202
+    pub.assert_called_once()
+    payload = pub.call_args.args[1] if len(pub.call_args.args) > 1 else pub.call_args.kwargs["payload"]
+    assert payload["pin"] == "0000"  # forwarded verbatim — FSM will reject
 
 
 def test_disarm_correct_pin(app_with_pin):
+    with patch("vigilar.web.blueprints.system._publish_arm_request") as pub:
         with app_with_pin.test_client() as c:
             rv = c.post("/system/api/disarm", json={"pin": "1234"})
-        assert rv.status_code == 200
+            assert rv.status_code == 202
+    pub.assert_called_once()
 
 
-def test_disarm_wrong_pin(app_with_pin):
+def test_disarm_wrong_pin_still_accepted_by_web_fsm_rejects(app_with_pin):
+    with patch("vigilar.web.blueprints.system._publish_arm_request") as pub:
         with app_with_pin.test_client() as c:
             rv = c.post("/system/api/disarm", json={"pin": "9999"})
-        assert rv.status_code == 401
+            assert rv.status_code == 202
+    pub.assert_called_once()
+    payload = pub.call_args.args[1] if len(pub.call_args.args) > 1 else pub.call_args.kwargs["payload"]
+    assert payload["pin"] == "9999"  # forwarded verbatim — FSM will reject
 
 
 def test_reset_pin_correct_passphrase(app_with_pin):
@@ -77,3 +98,35 @@ def test_reset_pin_wrong_passphrase(app_with_pin):
             "new_pin": "5678",
         })
         assert rv.status_code == 401
+
+
+def test_arm_publishes_arm_request_on_mqtt(app_with_pin):
+    """POST /system/api/arm must publish a SYSTEM_ARM_REQUEST message
+    carrying the mode, pin, and a 'web' triggered_by tag."""
+    with patch("vigilar.web.blueprints.system._publish_arm_request") as pub:
+        with app_with_pin.test_client() as c:
+            rv = c.post(
+                "/system/api/arm",
+                json={"mode": "ARMED_AWAY", "pin": "1234"},
+            )
+            assert rv.status_code == 202
+            assert rv.get_json()["ok"] is True
+
+    pub.assert_called_once()
+    call_args = pub.call_args
+    # _publish_arm_request(cfg, payload) — payload is args[1] or kwargs["payload"]
+    payload = call_args.args[1] if len(call_args.args) > 1 else call_args.kwargs["payload"]
+    assert payload["mode"] == "ARMED_AWAY"
+    assert payload["pin"] == "1234"
+    assert payload["triggered_by"] == "web"
+
+
+def test_disarm_publishes_arm_request(app_with_pin):
+    with patch("vigilar.web.blueprints.system._publish_arm_request") as pub:
+        with app_with_pin.test_client() as c:
+            rv = c.post("/system/api/disarm", json={"pin": "1234"})
+            assert rv.status_code == 202
+
+    pub.assert_called_once()
+    payload = pub.call_args.args[1] if len(pub.call_args.args) > 1 else pub.call_args.kwargs["payload"]
+    assert payload["mode"] == "DISARMED"

tests/unit/test_web.py

@@ -102,3 +102,36 @@ def test_recordings_page_loads():
     with app.test_client() as client:
         resp = client.get("/recordings/")
         assert resp.status_code == 200
+
+
+def test_system_status_reflects_fsm_arm_state(tmp_path, monkeypatch):
+    """system_status must read the current arm state from the DB,
+    not return a hardcoded stub. Regression guard for the web-to-FSM
+    async flow introduced in issue #2."""
+    from vigilar.config import SystemConfig, VigilarConfig
+    import vigilar.storage.db as db_module
+    from vigilar.storage.db import get_db_path
+    from vigilar.storage.schema import metadata
+    from vigilar.storage.queries import insert_arm_state
+    from vigilar.web.app import create_app
+    from sqlalchemy import create_engine
+
+    data_dir = tmp_path / "data"
+    data_dir.mkdir()
+    cfg = VigilarConfig(system=SystemConfig(data_dir=str(data_dir)))
+
+    # Build an isolated engine (bypass the module-level singleton)
+    db_path = get_db_path(str(data_dir))
+    isolated_engine = create_engine(f"sqlite:///{db_path}", echo=False)
+    metadata.create_all(isolated_engine)
+
+    insert_arm_state(isolated_engine, "ARMED_AWAY", "test", None)
+
+    # Patch the singleton so the blueprint's get_engine() returns our engine
+    monkeypatch.setattr(db_module, "_engine", isolated_engine)
+
+    app = create_app(cfg)
+    with app.test_client() as c:
+        resp = c.get("/system/status")
+        assert resp.status_code == 200
+        assert resp.get_json()["arm_state"] == "ARMED_AWAY"

vigilar/cli/cmd_config.py

@@ -47,8 +47,10 @@ def show_cmd(config_path: str | None) -> None:
         # Redact sensitive fields
         if data.get("web", {}).get("password_hash"):
             data["web"]["password_hash"] = "***"
-        if data.get("system", {}).get("arm_pin_hash"):
-            data["system"]["arm_pin_hash"] = "***"
+        if data.get("security", {}).get("pin_hash"):
+            data["security"]["pin_hash"] = "***"
+        if data.get("security", {}).get("recovery_passphrase_hash"):
+            data["security"]["recovery_passphrase_hash"] = "***"
         if data.get("alerts", {}).get("webhook", {}).get("secret"):
             data["alerts"]["webhook"]["secret"] = "***"
         click.echo(json.dumps(data, indent=2))
@@ -60,12 +62,9 @@ def show_cmd(config_path: str | None) -> None:
 @config_cmd.command("set-password")
 @click.option("--config", "-c", "config_path", default=None, help="Path to vigilar.toml.")
 def set_password_cmd(config_path: str | None) -> None:
-    """Generate a bcrypt hash for the web UI password."""
+    """Generate a scrypt hash for the web UI password."""
     try:
-        import hashlib
-
         password = click.prompt("Enter web UI password", hide_input=True, confirmation_prompt=True)
-        # Use SHA-256 hash (bcrypt requires external dep, but cryptography is available)
         from cryptography.hazmat.primitives.kdf.scrypt import Scrypt
         import os
 
@@ -82,14 +81,10 @@ def set_password_cmd(config_path: str | None) -> None:
 
 @config_cmd.command("set-pin")
 def set_pin_cmd() -> None:
-    """Generate an HMAC hash for the arm/disarm PIN."""
-    import hashlib
-    import hmac
-    import os
+    """Generate a PBKDF2 hash for the arm/disarm PIN."""
+    from vigilar.alerts.pin import hash_pin
 
     pin = click.prompt("Enter arm/disarm PIN", hide_input=True, confirmation_prompt=True)
-    secret = os.urandom(32)
-    mac = hmac.new(secret, pin.encode(), hashlib.sha256).hexdigest()
-    hash_str = secret.hex() + ":" + mac
-    click.echo(f"\nAdd this to your vigilar.toml [system] section:")
-    click.echo(f'arm_pin_hash = "{hash_str}"')
+    hash_str = hash_pin(pin)
+    click.echo("\nAdd this to your vigilar.toml [security] section:")
+    click.echo(f'pin_hash = "{hash_str}"')

vigilar/config.py

@@ -1,5 +1,6 @@
 """Configuration loading and validation via TOML + Pydantic."""
 
+import logging
 import sys
 import tomllib
 from pathlib import Path
@@ -23,6 +24,8 @@ from vigilar.constants import (
     CameraLocation,
 )
 
+log = logging.getLogger(__name__)
+
 # --- Camera Config ---
 
 class CameraConfig(BaseModel):
@@ -435,4 +438,13 @@ def load_config(path: str | Path | None = None) -> VigilarConfig:
             raw["sensors.gpio"] = gpio_config
         # The [[sensors]] array items remain as 'sensors' key from TOML parsing
 
-    return VigilarConfig(**raw)
+    cfg = VigilarConfig(**raw)
+
+    if cfg.system.arm_pin_hash and not cfg.security.pin_hash:
+        log.warning(
+            "DEPRECATED: [system] arm_pin_hash is ignored; the arm/disarm "
+            "PIN lives under [security] pin_hash. Run `vigilar config "
+            "set-pin` and paste the output into [security]."
+        )
+
+    return cfg

vigilar/constants.py

@@ -210,6 +210,12 @@ class Topics:
     SYSTEM_ALERT = "vigilar/system/alert"
     SYSTEM_SHUTDOWN = "vigilar/system/shutdown"
     SYSTEM_RULES_UPDATED = "vigilar/system/rules_updated"
+    # Web-to-FSM arm/disarm request (FSM verifies the PIN and transitions)
+    SYSTEM_ARM_REQUEST = "vigilar/system/arm_request"
+
+    # Classified events forwarded to the web SSE bridge (see events.processor
+    # and web.sse_bridge).
+    EVENTS_PUBLISHED = "vigilar/events/published"
 
     # Wildcard subscriptions
     ALL = "vigilar/#"

vigilar/events/processor.py

@@ -9,7 +9,7 @@ from sqlalchemy.engine import Engine
 
 from vigilar.bus import MessageBus
 from vigilar.config import VigilarConfig
-from vigilar.constants import EventType, Severity, Topics
+from vigilar.constants import ArmState, EventType, Severity, Topics
 from vigilar.events.rules import RuleEngine
 from vigilar.events.state import ArmStateFSM
 from vigilar.storage.db import get_db_path, init_db
@@ -58,12 +58,20 @@ class EventProcessor:
         fsm.set_bus(bus)
         bus.connect()
 
-        # Subscribe to all Vigilar topics
+        # Subscribe to all Vigilar topics (events/motion/sensors/etc.)
         def on_message(topic: str, payload: dict[str, Any]) -> None:
             self._handle_event(topic, payload, engine, fsm, rule_engine, bus)
 
         bus.subscribe_all(on_message)
 
+        # Dedicated subscription for web-originated arm/disarm requests.
+        # Kept separate from on_message because these are commands, not
+        # classifiable events.
+        def on_arm_request(topic: str, payload: dict[str, Any]) -> None:
+            self._handle_arm_request(payload, fsm)
+
+        bus.subscribe(Topics.SYSTEM_ARM_REQUEST, on_arm_request)
+
         log.info("Event processor started")
 
         # Main loop
@@ -103,6 +111,22 @@ class EventProcessor:
                 payload=payload,
             )
 
+            # Broadcast a classified summary for the web SSE bridge. This is
+            # independent of rule actions and DB storage — the web process
+            # subscribes to Topics.EVENTS_PUBLISHED and forwards each message
+            # to connected browser clients.
+            bus.publish(
+                Topics.EVENTS_PUBLISHED,
+                {
+                    "id": event_id,
+                    "ts": int(time.time() * 1000),
+                    "type": event_type,
+                    "severity": severity,
+                    "source_id": source_id,
+                    "payload": payload,
+                },
+            )
+
             # Insert pet/wildlife sightings
             if event_type in (
                 EventType.PET_DETECTED, EventType.PET_ESCAPE, EventType.UNKNOWN_ANIMAL
@@ -144,6 +168,26 @@ class EventProcessor:
         except Exception:
             log.exception("Error processing event on %s", topic)
 
+    def _handle_arm_request(
+        self,
+        payload: dict[str, Any],
+        fsm: ArmStateFSM,
+    ) -> None:
+        """Handle an arm/disarm request received over MQTT.
+
+        Payload fields:
+          - mode: str — desired ArmState ("DISARMED", "ARMED_HOME", "ARMED_AWAY")
+          - pin: str — plaintext PIN (FSM verifies against security.pin_hash)
+          - triggered_by: str — origin tag for the audit log (e.g. "web")
+        """
+        mode = payload.get("mode", "")
+        if mode not in ArmState.__members__:
+            log.warning("Ignoring arm request with invalid mode: %r", mode)
+            return
+        pin = payload.get("pin", "")
+        triggered_by = payload.get("triggered_by", "unknown")
+        fsm.transition(ArmState(mode), pin=pin, triggered_by=triggered_by)
+
     def _classify_event(
         self, topic: str, payload: dict[str, Any]
     ) -> tuple[str | None, str | None, str | None]:

vigilar/events/state.py

@@ -1,12 +1,11 @@
 """Arm state finite state machine."""
 
-import hashlib
-import hmac
 import logging
 import time
 
 from sqlalchemy.engine import Engine
 
+from vigilar.alerts.pin import verify_pin
 from vigilar.config import VigilarConfig
 from vigilar.constants import ArmState, EventType, Severity, Topics
 from vigilar.storage.queries import get_current_arm_state, insert_arm_state, insert_event
@@ -19,7 +18,7 @@ class ArmStateFSM:
 
     def __init__(self, engine: Engine, config: VigilarConfig):
         self._engine = engine
-        self._pin_hash = config.system.arm_pin_hash
+        self._pin_hash = config.security.pin_hash
         self._state = ArmState.DISARMED
         self._bus = None
         self._load_initial_state()
@@ -43,12 +42,11 @@ class ArmStateFSM:
         return self._state
 
     def verify_pin(self, pin: str) -> bool:
-        """Verify a PIN against the stored hash using HMAC comparison."""
+        """Verify a PIN against the stored PBKDF2 hash."""
         if not self._pin_hash:
             # No PIN configured — allow all transitions
             return True
-        candidate = hashlib.sha256(pin.encode()).hexdigest()
-        return hmac.compare_digest(candidate, self._pin_hash)
+        return verify_pin(pin, self._pin_hash)
 
     def transition(
         self,
@@ -68,9 +66,10 @@ class ArmStateFSM:
         old_state = self._state
         self._state = new_state
 
-        # Log to database
-        pin_hash = hashlib.sha256(pin.encode()).hexdigest() if pin else None
-        insert_arm_state(self._engine, new_state.value, triggered_by, pin_hash)
+        # pin_hash is always None here: PBKDF2 uses a random salt per call, so
+        # re-hashing the pin now would produce a value unrelated to the stored
+        # hash, making the column useless for audit correlation. See issue #2.
+        insert_arm_state(self._engine, new_state.value, triggered_by, None)
 
         # Log event
         insert_event(

vigilar/main.py

@@ -67,9 +67,27 @@ class SubsystemProcess:
 def _run_web(cfg: VigilarConfig) -> None:
     """Run the Flask web server in a subprocess."""
     from vigilar.web.app import create_app
+    from vigilar.web.sse_bridge import start_sse_bridge
 
     app = create_app(cfg)
+
+    # Forward classified events from MQTT to browser SSE clients. Failure
+    # here must not kill the web process — the UI still works without
+    # live updates, it just requires a page refresh.
+    sse_bus = None
+    try:
+        sse_bus = start_sse_bridge(cfg)
+    except Exception:
+        log.exception("Failed to start SSE bridge; live event timeline will not update")
+
+    try:
         app.run(host=cfg.web.host, port=cfg.web.port, debug=False, use_reloader=False)
+    finally:
+        if sse_bus is not None:
+            try:
+                sse_bus.disconnect()
+            except Exception:
+                log.exception("Error disconnecting SSE bridge bus")
 
 
 def _run_event_processor(cfg: VigilarConfig) -> None:

vigilar/web/blueprints/system.py

@@ -36,8 +36,20 @@ def _save_and_reload(new_cfg: VigilarConfig) -> None:
 def system_status():
     """JSON API: overall system health."""
     cfg = _get_cfg()
+
+    arm_state = "DISARMED"
+    try:
+        from vigilar.storage.db import get_db_path, get_engine
+        from vigilar.storage.queries import get_current_arm_state
+        engine = get_engine(get_db_path(cfg.system.data_dir))
+        stored = get_current_arm_state(engine)
+        if stored:
+            arm_state = stored
+    except Exception:
+        current_app.logger.exception("Failed to read arm state from DB")
+
     return jsonify({
-        "arm_state": "DISARMED",
+        "arm_state": arm_state,
         "ups": {"status": "UNKNOWN"},
         "cameras_online": 0,
         "cameras_total": len(cfg.cameras),
@@ -54,27 +66,46 @@ def settings_page():
 
 # --- Arm/Disarm ---
 
+def _publish_arm_request(cfg: VigilarConfig, payload: dict) -> None:
+    """Publish an arm/disarm request on MQTT for the event processor to pick up."""
+    from vigilar.bus import MessageBus
+    from vigilar.constants import Topics
+
+    bus = MessageBus(cfg.mqtt, client_id="vigilar-web-arm-request")
+    bus.connect()
+    if not bus.connected:
+        raise RuntimeError("MQTT broker did not accept connection within timeout")
+    try:
+        bus.publish(Topics.SYSTEM_ARM_REQUEST, payload)
+    finally:
+        bus.disconnect()
+
+
 @system_bp.route("/api/arm", methods=["POST"])
 def arm_system():
     data = request.get_json() or {}
     mode = data.get("mode", "ARMED_AWAY")
     pin = data.get("pin", "")
-    cfg = _get_cfg()
-    pin_hash = cfg.security.pin_hash
-    if pin_hash and not verify_pin(pin, pin_hash):
-        return jsonify({"error": "Invalid PIN"}), 401
-    return jsonify({"ok": True, "state": mode})
+    payload = {"mode": mode, "pin": pin, "triggered_by": "web"}
+    try:
+        _publish_arm_request(_get_cfg(), payload)
+    except Exception:
+        current_app.logger.exception("Failed to publish arm request")
+        return jsonify({"error": "bus unavailable"}), 503
+    return jsonify({"ok": True, "mode": mode}), 202
 
 
 @system_bp.route("/api/disarm", methods=["POST"])
 def disarm_system():
     data = request.get_json() or {}
     pin = data.get("pin", "")
-    cfg = _get_cfg()
-    pin_hash = cfg.security.pin_hash
-    if pin_hash and not verify_pin(pin, pin_hash):
-        return jsonify({"error": "Invalid PIN"}), 401
-    return jsonify({"ok": True, "state": "DISARMED"})
+    payload = {"mode": "DISARMED", "pin": pin, "triggered_by": "web"}
+    try:
+        _publish_arm_request(_get_cfg(), payload)
+    except Exception:
+        current_app.logger.exception("Failed to publish arm request")
+        return jsonify({"error": "bus unavailable"}), 503
+    return jsonify({"ok": True, "mode": "DISARMED"}), 202
 
 
 @system_bp.route("/api/reset-pin", methods=["POST"])

vigilar/web/sse_bridge.py

@@ -0,0 +1,36 @@
+"""Bridge classified events from MQTT to Server-Sent Events subscribers.
+
+The events subsystem (`vigilar.events.processor.EventProcessor`) publishes
+classified events to `Topics.EVENTS_PUBLISHED`. The Flask web process runs
+in its own OS process, so to make the in-browser event timeline update
+live it must subscribe to that topic via its own `MessageBus` client and
+forward every message to `broadcast_sse_event`.
+"""
+
+import logging
+from typing import Any
+
+from vigilar.bus import MessageBus
+from vigilar.config import VigilarConfig
+from vigilar.constants import Topics
+from vigilar.web.blueprints.events import broadcast_sse_event
+
+log = logging.getLogger(__name__)
+
+
+def forward_event(topic: str, payload: dict[str, Any]) -> None:
+    """MQTT handler: forward a classified event to SSE subscribers."""
+    broadcast_sse_event(payload)
+
+
+def start_sse_bridge(cfg: VigilarConfig) -> MessageBus:
+    """Create an MQTT client that forwards classified events to SSE clients.
+
+    Returns the connected `MessageBus` so the caller can disconnect it on
+    shutdown.
+    """
+    bus = MessageBus(cfg.mqtt, client_id="vigilar-web-sse-bridge")
+    bus.subscribe(Topics.EVENTS_PUBLISHED, forward_event)
+    bus.connect()
+    log.info("SSE bridge started: subscribed to %s", Topics.EVENTS_PUBLISHED)
+    return bus