[system]
name = "Vigilar Home Security"
timezone = "America/New_York"
data_dir = "/var/vigilar/data"
recordings_dir = "/var/vigilar/recordings"
hls_dir = "/var/vigilar/hls"
log_level = "INFO"
# arm_pin_hash = ""  # Set via: vigilar config set-pin

[mqtt]
host = "127.0.0.1"
port = 1883

[web]
host = "0.0.0.0"
port = 49735
# tls_cert = "/etc/vigilar/certs/cert.pem"
# tls_key  = "/etc/vigilar/certs/key.pem"
username = "admin"
# password_hash = ""  # Set via: vigilar config set-password

[zigbee2mqtt]
mqtt_topic_prefix = "zigbee2mqtt"

[ups]
enabled = true
nut_host = "127.0.0.1"
nut_port = 3493
ups_name = "ups"
poll_interval_s = 30
low_battery_threshold_pct = 20
critical_runtime_threshold_s = 300
shutdown_delay_s = 60

[storage]
encrypt_recordings = true
key_file = "/etc/vigilar/secrets/storage.key"
max_disk_usage_gb = 200
free_space_floor_gb = 10

[remote]
enabled = false
upload_bandwidth_mbps = 22.0
remote_hls_resolution = [426, 240]
remote_hls_fps = 10
remote_hls_bitrate_kbps = 500
max_remote_viewers = 4
tunnel_ip = "10.99.0.2"

[alerts.local]
enabled = true
syslog = true
desktop_notify = false

[alerts.web_push]
enabled = true
vapid_private_key_file = "/etc/vigilar/secrets/vapid_private.pem"
vapid_claim_email = "mailto:admin@vigilar.local"

[alerts.email]
enabled = false
# smtp_host = "mail.lan"
# smtp_port = 587
# from_addr = "vigilar@home.lan"
# to_addr = "admin@home.lan"
# use_tls = true

[alerts.webhook]
enabled = false
# url = ""
# secret = ""

# --- Cameras ---
# Add one [[cameras]] block per camera.

[[cameras]]
id = "front_door"
display_name = "Front Door"
rtsp_url = "rtsp://192.168.1.101:554/stream1"
enabled = true
record_continuous = false
record_on_motion = true
motion_sensitivity = 0.7
motion_min_area_px = 500
pre_motion_buffer_s = 5
post_motion_buffer_s = 30
idle_fps = 2
motion_fps = 30
retention_days = 30
resolution_capture = [1920, 1080]
resolution_motion = [640, 360]

[[cameras]]
id = "backyard"
display_name = "Backyard"
rtsp_url = "rtsp://192.168.1.102:554/stream1"
enabled = true
record_continuous = false
record_on_motion = true
motion_sensitivity = 0.7
retention_days = 30

[[cameras]]
id = "side_yard"
display_name = "Side Yard"
rtsp_url = "rtsp://192.168.1.103:554/stream1"
enabled = true
record_on_motion = true
motion_sensitivity = 0.7
retention_days = 30

[[cameras]]
id = "garage"
display_name = "Garage"
rtsp_url = "rtsp://192.168.1.104:554/stream1"
enabled = true
record_on_motion = true
motion_sensitivity = 0.7
retention_days = 30

# --- Sensors ---
# Add one [[sensors]] block per sensor.

[[sensors]]
id = "front_door_contact"
display_name = "Front Door Contact"
type = "CONTACT"
protocol = "ZIGBEE"
device_address = "0x00158d0001a2b3c4"
location = "Front Door"

[[sensors]]
id = "pir_living_room"
display_name = "Living Room PIR"
type = "MOTION"
protocol = "ZIGBEE"
device_address = "0x00158d0001deadbe"
location = "Living Room"

[sensors.gpio]
bounce_time_ms = 50

# --- Rules ---

[[rules]]
id = "intruder_alert"
description = "Motion detected when armed away"
conditions = [
    {type = "arm_state", value = "ARMED_AWAY"},
    {type = "sensor_event", sensor_id = "pir_living_room", event = "MOTION_ACTIVE"},
]
logic = "AND"
actions = ["alert_all", "record_all_cameras"]
cooldown_s = 120

[[rules]]
id = "door_opened_armed"
description = "Door contact opened while armed"
conditions = [
    {type = "arm_state", value = "ARMED_AWAY"},
    {type = "sensor_event", sensor_id = "front_door_contact", event = "CONTACT_OPEN"},
]
logic = "AND"
actions = ["alert_all"]
cooldown_s = 60